Fast charging not working Nothing phone (2)

AneeshKulkarni · 2023-11-05T04:08:24+00:00

Hi everyone, I bought my Nothing phone (2) a couple of weeks ago. Had ordered the Nothing charger with the phone. Since then i have been noticing this const...

RabelXx_

i bought phone 1 two months ago

now i am facing slow charging issues 0 to 100 in 3 hours plz anyone can help me how to solve this issue

RahulRaj_JzyiPUh611

RabelXx_ dude.. really?? Now I am scared.

Edmachinery

RabelXx_ have your problem solved?

tony_k

You need a PD with PPS enabled. The Huawei fast charger was only able to hit 10w (it works for Huawei phone), but the Samsung 45w one works fine. It just depends on the brick you use.

AneeshKulkarni

Still facing the same issue, fast charging does not activate at times, have to reconnect the chargers multiple times to get it enebaled

Nothing_zXAH9pyZXa

AneeshKulkarni same issue for me. Looks like a bug

igen0

Probably an issue with the Type C port of your device. Try with a different cable too just in case yours is damaged.

MIHIRPAGNIS

For my LG phones I faced same issue the trick was it used to charge fast with one side and slow with other, so if it’s charging slow I would ask you to remove the pin turn it 180degree plug it again and then try. Let me know if it works ,Awaiting reply 😉

Nothing_zXAH9pyZXa

Same issue for me. Fast charging is a hit or miss. Need to try multiple times. No debris in port. Same issue with different cable as well. Guess this seems to be a bug. Happening after recent updates.

Nothing_zXAH9pyZXa

Derren Can you please verify if this is not a bug ? Guess it has to do something with the optimised charging introduced lately. Were the phone intelligently tries to avoid rapid charging when the phone is left in charge overnight

Saurav

Nothing_zXAH9pyZXa Intelligent Charging takes effect when your phone reaches 80%+ charge. After 80% the phone will charge slowly.

On your issue, it is highly possible that you have a hardware issue either with the Type-C port, cable, charging brick or maybe the power source itself.

DIGVIJAYPATEL_g9KUpT9NSf

AneeshKulkarni same happens with my brand new nothing 2a with original nothing charger and brand new nothing cable.

YuvarajUV

I’m using Nothing Phone 1. Updated to the latest version 2.5.3 A. After update my phone charging speed became very slow and draining like a hell.

Even it’s showing Rapid charging but charging very slow. Even in idle it’s draining very fast. Seems like a bug.

VivekBhagat

YuvarajUV checkphone temp summer time in india phone will heat and charging will become slow bcoz of that

YuvrajRajput_osRNrhiKBG

I have also same problem with nothing phone 2a, I have everything original still it’s not using 45w speed. Its happening 70% of time 30% it’s detect 45w and charges quick. it’s surely a software bug

YuvrajRajput_osRNrhiKBG

it’s shows charging rapidly too

AppuVenkatesan

Mostly All users facing this same issue please solve buy updates as soon as possible

Guys Any Ticks ? Available For This Issue

JimmyHsu

The charging situation is really weird, I myself tested some chargers, all PPS supported(without PPS you stuck at 18W), at the right phone stats to trigger 40w+ charging (phone below 35 degrees Celsius, battery level below 20%, screen off), and with a physical charging meter(Kamera VA-3050C) connected to the type C-C cord(Lindy 5A supported).

Some worked, example like the Xiaomi 67w charger(18V-2.XA=40W+), but the Anker prime 737 65W stuck at 27W+(9V-3A=27W), elecom 65W(pps 45w) charger stuck at 27(same as the Anker 737)…

I also looked around the web and found out the Anker prime brick does support 3.3V~11V-5A through testing, so I assume the problem is with the phone

I hope they can look into this problem

VivekBhagat

While Nothing team Have mentioned that they support 45w PD*/PPS/QC.While it does fast charge on chargers That supports PPS. but if you use Only charger that has PD it will never go above 12w and 3000amp.

I’m not able to understand why they are marketing PD if their phone doesn’t support Proper PD charging

i’ve spigen 70w pd charger it fast charges my laptop and iPad on their maximum charging speed but on nothing phone 2 it goes only to 12w max and their website have not mentioned that your charger should support PPS Not PD or Else cry for 2hrs to full charge.

it for does mention on thier website:

To ensure optimum charging, we recommend you use a Nothing PPS protocol charger, turn off the screen, and charge at room temperature (25°C±3°C). The full charge time will be around 1Hr.

But why bothering to mention PD.

MitunManav

VivekBhagat I’m using the official nothing charger tho but not able to charge with in one hour do you know wby by any chance?

VivekBhagat

MitunManav check ambient temperature phone should be under 30C to charge at maximum watt

MitunManav

VivekBhagat okay thanks a lot will check