As some of you may have seen across socials on Instagram - CMF by Nothing are running a daily “build” series across nine (9) days. Today as I write this post, we are only on Day Three (3).

Day One (1) - We saw Akis, one of Nothing’s Co-Founders, start the process. By telling us about the CMF Phone 1’s screen! Video is viewable here!

Day Two (2) - Zack, aka JerryRigEverything was a special guest, this time to show us the main motherboard of this upcoming phone and some of the sensors on the board. Once again, the video is still viewable on Instagram via this link!

Day Three (3) - This time, we have another special guest, in the guise of TechnicalGuruji! Video can be found here! We got some nice info in this video clip, the SoC being used, the selfie camera specs, plus that all important factor…a clue to the PRICE!

Day Four (4) - See below for the full post, or view the video from this link here.

Day Five (5) - Video available from here! This time, talking about the Flexible Printed Circuits and the Big 5000mAh Battery! Allowing for 22-Hours of non-stop YouTube video playback?!

Day Six (6) - Tech Burner shows us the under screen fingerprint sensor, the speaker and the rest of the lower frame of the phone! Video here!

Day Seven (7) - SuperSaf is here! He brings us that all important camera news! The CMF Phone 1 is rocking a Sony 50MP Camera, with a separate portrait sensor. The video can be watched here.

Day Eight (8) - Here we go, the final design has been revealed, in this video here! Interchangeable backs?! Accessories?! Plus a sneaky peek at Watch Pro 2 and Buds Pro 2?!? - Thanks to Rashmika Mandanna for this one!

Day Nine (9) - Akis is back again, showcasing in this video here… putting the CMF Phone 1 into its box, ready to hit the shelves soon!

Keep following along with me, and I shall keep this post updated with the specs that are dropped daily, the videos that are dropped and everything else that comes with these teasers!

(Confirmed) CMF Phone 1 Specs:

  • Screen - Super AMOLED Display, 120Hz Adaptive Refresh Rate, HDR10+ (over 1 Billion Colours!) and upto 2000+ Nits of Peak Brightness!
  • Motherboard Components - Geo-Magnet sensor (a tiny compass and power-saving compared to GPS), Gyroscope and Accelerator (to sense tilt/direction).
    Processor - MediaTek Dimensity 7300 5G! With AnTuTu scores of 673,000!
    RAM - Up to 16GB!
  • Storage - ??GB + Expandable, with a MicroSD Card, up to 2TB!
  • Cameras - Sony 50MP Main Camera, with an accompanying Portrait Sensor on the back! 16MP Front Selfie Camera!
  • Battery - 5000mAh Cell! Quoted for two-day battery life and to have 22-hours of non-stop YouTube playback!
  • Others - Haptic Motors, RF for Mobile Data (5G), WiFi, Bluetooth, GPS etc. Under display fingerprint sensor. Bottom-firing speaker, with a chamber similar to a violin design!
  • Accessories - Changeable backs, with lots of colours, an answer for the screwdriver! Other accessories, such as kick stands, lanyards and is that a wallet holder or something?!
  • Price - Under ₹20,000! “Around £200” - SuperSaf.

To find out all about the new CMF Phone 1, as well as Buds Pro 2 and Watch Pro 2, sign up to the event reminder at this link here!! The online event shall be hosted on CMF.tech on Monday 8th July at 10:00 BST.

Feel free to drop your speculations for future teasers here, and discuss all things CMF Phone 1! 🔥

    Day Four (4) is here!

    This time, Lew from UnboxTherapy makes an appearance and he shows us some of the following, haptic motor and the wireless systems, such as the SIM Card slot. Which holds the capability to add a MicroSD card, UPTO 2TB!

    The video is viewable here:

    Specs have been updated in the post above! 👀

    Who do we think shall appear across the next few days? - Any other tech media we want to see building the CMF Phone 1? - I am hoping for Heru to be involved, but with no instruction sheet, all done blind! 😉

    Day Five (5) is here!

    Let’s take a look at the battery, some of the Flexible Printed Circuits with Faisal Alsaif!

    Video is watchable on Instagram here:

    Only four more days to go…👀

    Ealesy101 22-Hours of non-stop YouTube video playback

    Wow! Unbelievable 🫣

    Ealesy101 Expandable, with a MicroSD Card, up to 2TB!

    Expandable memory up to 2TB 😲

    We are back, here is Day Six (6)!

    This time, with the help of Tech Burner, we have the speaker, the under screen fingerprint sensor and the lower frame of the CMF Phone 1.

    Check out the video here:

    And don’t forget to get involved with the giveaways on CMF’s page. You could be in with the chance to WIN a CMF Phone 1! 👀
    We really are into the final few details now, what can we expect from the main camera(s) on the back? - Will it have any further surprises in store? What’s that mysterious wheel?!

    Tech Burner provides a great look at the CMF Phone 1, highlighting its impressive features such as the under-screen fingerprint sensor, the powerful speaker, and the sleek lower frame. These elements, combined, contribute to the phone’s appeal and performance, reinforcing its position as a strong contender in the market. I think we expect 50MP dual camera setup onCMF Phone 1 🫣🥰📸

      SyedNabi - Very fun prediction! Hopefully it won’t be long until we see the final touches on the CMF Phone 1 and get to see what other camera hardware it has 🤞🏼

      Here is Day Seven (7)! Brought to you by SuperSaf, video is here:

      SyedNabi - Right you are! The CMF Phone 1 has a Sony 50MP Camera on the back, as well as a dedicated Portrait Sensor to assist with portrait photos and that Bokeh effect! 📸

      calvinmulders - No news on NFC yet, but there are still two more days of this little series. So keep your eyes peeled! 👀

        Ealesy101 Portrait Sensor to assist with portrait photos and that Bokeh effect

        Another Pro level feature 🤩

        Hello, it’s Day Eight (8)!

        It is time for the back cover, the additional accessories and a sneaky peak at Watch Pro 2 and Buds Pro 2! 👀 Let’s take a peek at the video, with Rashmika Mandanna:

        One more day to go!
        Thanks to everyone who has followed along, not long until the launch event itself 🔥

        Orange back cover of #CMFPhone1 preety Cool.

        Storage 8 GB! 🫣

        The final day… Day Nine (9)

        Akis is back today to put the final built up phone into its box and packaging!

        What looks like a standard box now, for Nothing Phone Products, the CMF Phone 1 Box is sleek and stylish. Coming with a SIM removal tool, a USB-C to C cable, paperwork and of course, the Phone itself! 👀

        I have really enjoyed the past few days, following along with this build series and learning almost all about this first phone from CMF by Nothing.

        Not long until the July 8th reveal, still time to sign up for reminders about the event over at www.cmf.tech 🔥

        I cannot wait to see this product hit the market and what crazy customisations people come up with… Thanks to everyone who has followed this thread ❤

        Rob ⚡️ - thank you! It has been a lot of fun!

        Props to the team for creating and producing the “Builds Series”! It’s been great to follow 👀

        All the best for the launch, both online and in India! 🔥 I shall be watching 😏