Hello,
I am facing a similar issue with my Nothing phone (2) with OS2.5 .
I can hear static white noise in the background when using a passive USB-C audio converter with my moondrop aria iems (TRS plug). Also tried with generic iem with TRRS plug and face the same issue.
Hi there!
Problem with static still persisting as of 1 Mars 2024.
Also when connected through USB C to USB C headphones (e.g bowers & Wilkins px7 s2), the volume as compared to Bluetooth is really really low. Bluetooth is really loud at 50% or so while wired is passable/fine at 85-90% but never really gets “loud”. Unsure if it has to do with aptx codecs boosting volume or if the USB C output from the phone 2 is just really weak or if it is some other software related issue. Would appreciate someone looking into it.
Thanks & have a wonderful day.
I also have dongle based on cx31993 and while I don’t hear the static on the output I have very loud static hiss on the input, so loud that I barely hear the mic. And the hiss is here no matter if headphones are plugged to DAC or not. I tested the DAC on pc and Samsung phone and there were no problems. Issue seems to be present only on my Nothing Phone 2a. Do you have this issue on your DACs and phones?
I have the same issue with my usb c to 3.5mm jack dongle with DAC and AMP when connected to Nothing Phone 2a. The audio output is working well but the input mic isn’t working. There’s just static when recording anything.
The dongle is working fine when connected to other devices
Same Problem in my Nothing Phone 2A i recently purchased a DAC type c to 3.5 mm jack but the micro Phone is not working. The moment I connect the converter a constant humming crackling or humming noise is picked up by every app that uses microphone. The connector works fine with every other device i tested it with, which is so annoying. Not only does this phone performs less in Antutu Scores from it’s competetor with same chipset but now this problem. May be purchasing this device was one of my worst decision ever.
In the latest update, the problem was fixed partly. The audio is being recorded but it’s not usable most of the times. Too much disturbance along with the recorded audio.
I didn’t hear much difference. The crackling in the voice recording is present with it disabled as well.
The microphone-recorded voice quality is very bad in Nothing Phone 2, even after several updates. I already tried a Type C to 3.5 converter with DAC, a Type C to 3.5 converter without DAC, and a Type C headphone without DAC so far. The converter and Type C headphones without DAC is slightly better but NOT AT ALL useful. The recorded voice is such that some noise cancellation or something filters part of the voice. All these work well on devices from other manufacturers (old as well as new) without any issues. So, I am very convinced that it has to do with the hardware or the software of the Nothing Phone 2 device itself.
Update:
So this issue still persists and using this phone with any dac dongle isnt a very good experience.
There is a partial solution though as mentioned by hamlinstephen, Use a USB C to 3.5mm dongle that does NOT have a built in DAC chip, this will work without introducing the static. They’re a bit rarer to find these days, but I found one on amazon from UGREEN that works just fine for £6.
MrMightyBun Hi mate, I’m facing the same issue. I bought Fiio JD 1 Type C IEM for my CMF PHONE 1. I heard a loud static whenever I activated google assistant or while I receive a notification. I returned it and I’m thinking to buy a Moon drop Chu II Type C IEM. I’m not sure whether the issue would be present again.
Hello guys, same issue on nothing phone 3a pro in car via AUX (3.5mm to usb-c dongle). I bought it few weeks ago and starts to hear that something is different as on my previous phone. I use the same configuration fór the old phone(Huawei nova9) and and quality of output is much better on that one.
