Charging Port Durability Issues in Nothing Phone 1 & 2: A Call for Improvement

Charan_DSCR · 2024-10-10T21:05:14+00:00

Ich habe das Nothing Phone 1 und Phone 2 gekauft und nach einem Jahr begann der Ladeanschluss beider Telefone nicht mehr zu funktionieren. Ich muss das Kabel jetzt stärker hineindrücken, damit sie aufgeladen werden. Als ich das Servicecenter besuchte, wurde mir gesagt, dass der Austausch des Ladeanschlusses etwa 5.000 Rupien kosten würde. Es ist nicht immer möglich, die eigenen Ladekabel von Nothing zu verwenden. In bestimmten Situationen müssen wir uns auf die Ladegeräte anderer verlassen, und das Produkt sollte dafür robust genug sein. Dieses Problem muss behoben werden und das Produkt sollte vor der Veröffentlichung haltbarer gemacht werden.

Jitesh K

I have been using my old OnePlus charger and the wire with my phone(2) and have not faced any such issues till now after almost a year

hrry

I would document this feedback / raise a ticket with support via settings>system>feedback in your settings app.

I would say that I’ve had a Nothing Phone(1) since its release and the charging port is still going strong. For this to happen across to of your Nothing devices I’d suggest looking at the wires you’re using but, also if you’re getting sand/grit/dirt into the charging port. I got sand into my Huawei Mate 40 Pro charging point and it caused havok for me, rarely charged.

JΛY

You can get it cleaned or clean it yourself with isopropyl alcohol. Happened with me 2 times, I just got it cleaned and works fine with crisp locking.

BrentO_Dell

I’m running into this issue and I’ve only had the NP2 for two weeks. It seemed fine at first, but I noticed that it wasn’t charging yesterday at work. I tried blowing it out with compressed air, that didn’t do anything, so I’m going to try alcohol tonight after I get home from work. I’m in the USA, so I’m not even sure if I have any repair/warranty options.

BaLaArAsAi

Charan_DSCR im

Blxckterfly im also facing this problem bro

MadOne

Try cleaning the port with a thin stick like a tooth pick. Dirt accumulation is the likely culprit.

TuralAliyev

I’m having same issue with Nothing Phone 1. I did not use only NP1 cable but various ones. Last 30 days I’m experiencing seriously with this issue. Yesterday I couldn’t charge over cable and had to buy wireless charger and these two days I’m charging with my witless charger.

Charan_DSCR

TuralAliyev
I watched some YouTube videos on cleaning the C port, and now it’s working.

SukhwinderSIngh_s26gtDi1xt

Charan_DSCR same issue hard to puch inside cable then charge mobile i order two cable boata nd ambrane type c to c but but not supported properly now what i do. How much cost you for new port.

CMF1_hacker

Pocket lint is your enemy

Clean regularly.

Tony 1

Charan_DSCR this 100% true got same issues on both of my phones 1 and 2. Must use same USB supplier as one plus had this issue on they’re product. Never had this on the apple products. On the plus great design phone 1 and 2 great software support. Not so sure of the design of 2a or 3a

MontyPython

Same Problem with my NP1. Hard to get contact to charge and I only used original nothing charger. In addition my phone is not connected or seen to my notebook so I cannot change files via this way.

Tony 1

I was waiting for phone 3 but looks like they are going to milk this series off 2a 2a plus 2a community edition. It will be same for 3 a 3a plus then 3a community edition and so on. Should have launched phone 3 with the original phone 1 and 2 camera design. Waiting for pixel 9 hopefully the leaked design is the one they go with. Looks great if not I’ll have to go back to iPhone

HaryanviBOY

I have been facing same issue ……the durability is not good …….. the cable and phone jack quality is poor

CMF1_hacker

I haven’t had this problem with my CMF1 but I occasionally clean the USB-C port with a metal implement and brush the earpiece with a toothbrush to clean out any pocket lint or dust and it works really well. On my old phones the built-in LED indicator would even get covered and I couldn’t see it when illuminated. I use tons of cable ends as I have likely have 20 charges between the offices and houses.

AbhishekDubey_kEMCOP6hPT

Charan_DSCR I own nothing phone 2 and I’m facing the same issue even though I’m using the cable that came with the mobile and nothing’s adapter

Akshansh_

Charan_DSCR I’m also facing the same problem and i use android auto more so if i get any speed breakers as my car passes through it gets disconnected. Frustrating 😡 also i have to specifically set my phone postion to get it charged. Also i have cleaned the port also but no change

RahulTathod

Having dame issue with my np2

Light

Charan_DSCR I’m having the same issue and i have seen others facing the same issue it’s the manufacturing defect

Sai 🇮🇳

Facing the same issue. I wonder how much it would cost in INR to fix this 🙁

Nächste Seite »