RohithTony Even I’m using 65w adaptor it’s not charging at least 10w power out put, it takes 2.5 to 3 hours to full charge
RohithTony KhaldounBaz yaa, now it’s charging around 20 to 25watts when temperatures cool even some times 30watts
FX-n If the charger is CMF/Nothing or compatible PD/PPS and this is the charging after factory reset, your unit is defective. My unit has a nasty software bug, any charger I use if it has big uptime, is locked at 14W, I need to unplug/plug again the charger to go up (26-29W tops with Nothing original charger 45W). Works fine first charge after I reboot it, then is doing the same.
CMF1_hacker FX-n On my CMF1, I only get 25-26W with a PD 3.0/PPS charger … I can’t get anywhere near 33W. The charger is an ANKER Nano 3. It is good to hear that the CMF/Nothing charger doesn’t do better. My non-PPS/PD2.0 chargers, all max out at 12-13W or so.
FX-n After update to Nothing OS 3.0 / Android 15, the Nothing Charger is charging the phone with 41W steadily. But this is after reboot, I will see how is charging further, without reboot, if the 14W bug is still present.
FX-n Spark nope, in my case it went UP, from 29W to 41W 🙂 This is awesome they fixed the charging, I will see later if the 14W bug on plugging the charger still exists.
