🎵 Nothing Headphone (1) - Version: 1.0.1.72 Changelog

Firmware (bot) · 2025-08-04T12:48:13+00:00

![](https://cdn.nothing.community/2025-08-04/1754311693-412174-output-header.jpg "banner") Feedback? In Nothing X: Go to Settings -> 'Support' -> Select your product -> 'Send feedback' **Firmware rollouts are usually staggered, meaning not all users will receive the update simultaneously. This approach allows us to monitor for any issues and ensure a smooth and stable deployment.** 1. Improved sound quality and enhanced sound performance at high volumes. 2. Optimized transparency mode performance. 3. Refined sound tuning ensures precise audio in challenging environments.

Turb0

Hi there.

Installed the firmware update today. I have to agree with the first comment. This one has been a step backwards in audio quality and made the headphones sound quieter even at max volume. Also something is going on with the jack on pc. I have a pair of beyer 900 pro x plugged to a fosi k7 dac amp and they sound loud at 44 volume. I have to pump the Nothing Headphone to 60 and still doesnt give enough volume. The dac/amp is rated for 300 ohm headphones.

Cheers

WarezWard0

Turb0 I’ve been fine with all the other changes to the Headphone (1) but I did run into this problem with the 3.5mm connection. I can get a good volume level out of it, but only in the last four steps of volume on my iFi Go Link. It would be great to get that analog input volume level synced up with the digital volume level (which is plenty loud for me).

I’m guessing the reason the 3.5mm input can’t be adjusted with the volume roller or manipulated with the EQ is a hardware thing more than a software thing?

Alex

Transparency mode is almost unusable now.
Even without music i can barely understand other people in my office speaking.

Lower frequencies dont come through at all. Everything sounds tinny and it feels like constant pressure on my ears.

Ryan-NerdzLab

SleepingAtSea Just got my Headphone (1) today, but I agree with what you said here. Headphone volume at max is too low and bass is lacking. I don’t prefer a ton of bass, so it’s good for me, but it would be nice to have the option.

odetojamie

yeah this new update kinda sucks imo dosent fix anything that was wrong with the original eq and makes more issues than fixes

Django_Unhinged

ah..i wont be updating then. thanks for heads-up

Anonymous875

Would also like an option to roll back, the bass seems less as does the overall volume and they were already on the quiet side to begin with

dylbreaking

Unfortunately, the sound quality and volume has greatly detoriated. Please come back to the previous sound tuning with a fix ASAP🙏🏻 At this stage, the sound feels like it came out from a 100$ headphone. That’s really a bummer for me cause i realy love those headphones 🥺

VK2025

dylbreaking So I take it we don’t recommend I install the update 😬 I just got a pair yesterday and I am scared to update, it keeps popping up asking me to install.

dylbreaking

VK2025 Yeah don’t update it yet until they release a fix and that the community confirms it actually fixes it 👍

willHA

The new update for the headphones 1 has made the bass almost non-existent and has made the transparency mode really compressed and to be honest just uncomfortable. They had it perfect the first time why did the role out this update, it’s really annoying as it is literally a downgrade and these headphones aren’t cheap. I just need to check if I’m going crazy or if anyone els has the same problem. I mean the nothing ears have better bass and transparency that the headphones 1 now.

JeremyHernandez_lAfkzVVukV

willHA I completely agree dude. Especially on how much these cost, it baffles me how much of a downgrade a firmware update can cause.

adbo

Thank you all for your feedback on the new Headphone (1) firmware. I raised your concerns with the team; they’re aware of the volume and transparency mode performance on version 1.0.1.72 and are working on a new version 🙂

dylbreaking

adbo Thank you very much for the feedback 🙏🏻

SleepingAtSea

adbo great to hear! Thank-you for the update.

willHA

I’m going to try do something to influence than to change it back or at least give us the option to revert back, the biggest reason for the update was some units has stability issues at higher volumes with more bass, but that leaves the units without this issue with a big downgrade.

JaimeLuna

SleepingAtSea I’m a new user, so I didn’t experience the previous firmware, but I can confirm that the volume is definitely an issue. It’s a shame to read that the sound quality also took a hit with the update. Other than that, I really love the headphones.

I had the exact same question you did: Is it possible to roll back to the prior firmware? I really hope someone can help us or that the company releases a fix.

wela

WarezWard0

Same for me, 3.5mm connection feels lower quality and way lower volume. Can you guys have a look at it? Thanks!

btw I got the new 1.0.1.74, transparency mode is way better, and max volume got increased as well (bt)