JeromeCueco Hi, Good day. I am also experiencing the same thing. But I am just wondering why should the Battery Health and Adaptive Battery be disabled if trying to fast charge. Fast charging works for me once I turn the two settings off. If those settings are turned on, it shows charging rapidly but the charging is very slow. Is it a bug? Should I always turn those config off? Much appreciated. Thanks,
thepercyb Same issue here š, when I checked the live wattage consumption it is not crossing 12W, even with other PD chargers as well. Nothing has to fix this ASAP using a S/W update.
VivekBhagat thepercyb they have limited PD charging 12w š¤£ and they only support PPS and PDO standrads
ParthasarathyK Mine also not working I tried diffrent chargers and powerbanks which supports pd still it is showing as charging only.
Rob ā”ļø thepercyb they are not, this is a glitch when the site canāt load a username. Looking into it š
Ghouless VivekBhagat Not true! Iām using Motorolaās TurboPower (68 W PD) and it works well, last charge was from 8% to 100% in 1:01 hā¦ For proper PD or QC charging you need quality charger and of course cable with e-markerā¦
Ghouless VivekBhagat No, as I said, quality PD charger (of course with correct voltage vs current) with quality cable (with e-marker) is what you need. I have also 120W charger from Xiaomi and gues what, itās also functioning. So, stop confusing others with your assumptions and get learned how PD/QC is functioning and what is PPS for.
VivekBhagat Ghouless this charger is PPS/PDO enabled bcoz iāve personally tried 3 PD (only) charger all were caped at 14w max
Ghouless VivekBhagat you are wrong and data sheet of this charger says the same. Btw, if charger is PPS enabled (so itās capable of continuous voltage/current change instead of regular negotiating), on specs you will find also variable voltage (eg. 3.3V-21V). As you can see, this charger is classic PD 3.0 charger, with negotiation of 5V/9V/11V/15V/20V. Seems, that you are not fully involved in this topic and just trying to argue on basis of your limited knowledge and experience, so Iām ending this discussion with hint : get a quality chargers and cables.
Nick_AVqvp7R3V9 I recently received my new nothing phone 2, how ever I quickly noticed some weird behaviour. I have 2 identical 25 watt charger bricks from Samsung and 2 separate usb c wires. 1 of the 25w bricks was causing the phone to rapidly start and stop charging. I quickly ruled this out to be a bad brick so I took this as a opportunity to finally try a 65w brick (also from Samsung) how ever this new brick caused the same to happen, how ever this time less rapid. Still stop and start charging. I have now tested all the bricks with wire combinations on my phone and other phonew. The problem is still only on my phone. Im afraid I will have to send my phone back although I really donāt want to.
StudiesStock Should i use nothing phone 2 data cable of 3a Or should buy any 5a cable for fast charging?? I have urbn 65 w gan charger phone charge at maximum 33watt with original nothing phone 2 cable Should i buy 5a cable for maximum 45w output
UhiniMukherjee My phone suddenly stopped charging, although itās showing charging rapidly. Anyone knows what can be done? I donāt think the port is damaged, has that been the issue it would have never showed charging rapidly.
