Community Reviews - CMF Watch Pro 2

Derren · 2024-07-08T09:20:00+00:00

Hello everyone! 👋 It’s finally time! ✨ the trio of new CMF products are here, Buds Pro 2, Phone 1, and Watch Pro 2. We’re thrilled to introduce these pr...

Ealesy101

KallurPrashanth - thanks for flagging via the app. Hopefully it is patched soon 🤞🏼

Lucas - if you could also flag this via the app. The more voices, the quicker they can work on the solution.

I shall do the same once I receive mine tomorrow 👀

peotus

ThourtEntertainment for the gestures you nedd to activate them on the watch, press on the type of gesture and try to do it. Then you should be able to set what it does.

The daily step goals missing is a bug as reported in previous comment from Ealesy101

SatishKumar_IjU3rYUt0m

Hi,

I recently purchased watch pro 2 for my son, he has a Lava Blaze 5g phone, have installed the cmf watch which is unable find the watch, however on the bluetooth setting the watch is detected and pairs to the watch but the app doesnt find the watch.

Earlier he had a smartwatch from mi which he was able to connect to from the same phone through its app.

I have tried everything from uninstalling the cmf app on phone, disconnecting all bluetooth devices connection on the phone, restarting the watch, but nothing seems to help.

Note: I have a Xiaomi phone, which can connect to watch pro 2 using the cmf watch app.

Any help is greatly appreciated 👍.

KritikalHit

My watch screen doesn’t come on when I recieve any new notifications on the watch 2 pro. I have to lift my wrist to wake up the screen.

Derren

KritikalHit this is the intended behaviour, the watch will provide haptic feedback prompting you to raise your wrist to view the notification.

fuzaco

Derren The FAQ says this:

How to use notification wake screen?

The notification wake screen on the watch is off by default. To enable it, follow these steps:
1. Connect the watch with the CMF Watch app.
2. Go to the watch’s settings page and scroll down.
3. Open **Display & Brightness.
4. Find **Notification to wake** and turn on the switch to enable this feature.
Once enabled, if the watch receives a notification while the screen is off, the screen will light up to alert you to check the notification immediately.
Please note that this feature can affect battery life, so it is recommended to disable it when not needed.

And yet that option is not available. I really don’t like rise to wake, so this is pretty much a deal breaker for me, especially since the official FAQ says it’s available.

LuMat

Hi, I have the watch for a few days now, but I can’t seem to find any option to sync my data with Google Fit / Health. In multiple reviews I read something like “A standout feature of the Watch App is its capability to sync data with third-party apps like Google Health.”. The only option I could find is to sync my data with Strava.

Am I missing something? How did you setup your watch pro 2 to sync your data with Google Fit / Health?

Louis ☕️

LuMat From the CMF website:

So expect an OTA update in a few weeks for this integration 👍️

AnandSingh_wwDASrXpZY

Got my watch today… and noticed few issues screen doesn’t lights up while getting any notifications… and not getting whatsapp call notifications

TejasMaisuriya

I got the watch today there’s 2 things bothering me

1- steps showing on display(in watch face) but it is nt working while we walk it is only working when we select indoor/outdoor exercise

2- when we get notification on watch then if we delete it then it still appear on phone’s notification bar..it should be removed as well…i have been using amazefit band so in that band there was this thing which i have mentioned that when i delete notification in the watch,it also removed from my phone’s notification bar.

Please fixed these two things nothing team.

AshishKumar_qm1R4nvXcJ

Got the watch on 13/7/2024 - Here are the issues I felt can be addressed better:

1 - Heart rate section should have an average heart rate metrics for the day too. Also once we click on the heart rate graph it should expand for our better understanding.

2 - Ghost steps, i was in a car and had to travel around 70 kms (there was an increase of around 2500 steps since sitting in the car and getting out of the car.)

3 - Heart rate, Spo2, stress monitoring have only the option of 24 hours monitoring or none.

4 - How are we to decide on the goal for steps, it is set at 2000 steps.

These are the major issues I felt the CMF team should address. If there is already a solution for it then please provide the answer.

Fractal

AshishKumar_qm1R4nvXcJ

2 and 3 needs to be fixed.

4 does not make sense, you can decide your own goal for the steps. You dont need need the watch to tell you how many steps you should walk. Ideal is 10k.

Derren

fuzaco I have not found this feature either.

I recommend providing feedback via the CMF watch app.

AshishKumar_qm1R4nvXcJ

Fractal I get it that the watch does not need to tell us how much to walk, but what i mean is that there is no way to change step goals ….atleast right now.

ashiqkp517

The voice assistant sound is comes from my phone, why the watch speaker doesn’t works on voice assistant

silvio_marazzato

ashiqkp517 I also have the same problem on my watch pro and it seems to be linked to the fact that I use Gemini as a voice assistant instead of the default one. Setting it back to the default one seems to have solved the problem

rajeshkumar_nXQC6qIf7M

Watch pro 2 in flash light second light is blinking it is abnormal

First it blinks with low brightness then suddenly brightness increases

Why this one is blinking

Derren

rajeshkumar_nXQC6qIf7M hey 👋

This doesn’t seem like normal behaviour. If you haven’t already done so please restart the watch.

If that doesn’t help, please report your feedback via the CMF watch app.

fuzaco

rajeshkumar_nXQC6qIf7M It’s the same for me, seems like a bug. Restarting the watch doesn’t help of course.

tomkarbowski

rajeshkumar_nXQC6qIf7M doesn’t seem normal, didn’t experience this during trial. Submit a big report

Leritus

rajeshkumar_nXQC6qIf7M

It’s normal, even I got confused but you need to swipe to select color and tap on selected color to on flash which increases brightness , tap again to off which brings back the brightness to normal.

roman1

Derren it is definitely normal behaviour. one is standard flash and the other (which is shown in video) is the SOS emergency flashlight

Derren

@rajeshkumar_nXQC6qIf7M roman1 yes, my apologies. Initially I thought they were referring to the second light option on the first page when tapping.

Indeed when you swipe across the second one is a strobe.

AlameenAmeen

The quick reply feature is not working.Whenever I am giving a quick reply in whatsapp for anyone it showing failed . I am providing the a video of my problem below. Please let me solve this issue.I have tried restarting the device then also the same

roman1

tomkarbowski swipe to the second one, I’m more than sure it’ll do the emergency SOS/strobe light for you as well.

« Previous Page Next Page »